Check out the newly revised PRO-TECT AIR 2.0!! Protect your engine from...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
We have two different rate torsion springs for our billet helix and...
This simple kit supplies you with all of the roller bearings in the...
ROCK Performance Rollers are made from engineering grade plastics...
We have 3 different clutch springs for all Polaris drive clutches, and...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb,...
No manufacturer
No supplier
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs and Ascenders 2012-2020 Mountain sleds. Also fits the high country models with the dual post steering. We were the originator for the Anti-Slop kit for the Arctic Cat M Series sleds, and the newer machines sure need it too. BDX has a developed a new replacement...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs 2012-2021. We were the originator for the Arctic Cat M Series sleds, and the newer machines sure need it too. The Anti-Slop 2.0 bushing is made of a high strength, high yield, high compression material that will take up the slop of your factory... BDX has a developed a new replacement...
The Axys 850 is an absolute beast under boost. The strongest motor Polaris has ever built, it has responded incredibly well to forced induction. Most riders running 3-7psi will find the simplicity and cleanliness of the standard kit to suit them. The Axys 850 is an absolute beast...
This simple kit will gain 40+ horsepower over stock and still run on 87 OCTANE!!! Get your Sidewinder or SRX just ripping and get great fuel economy too! Just send us your ecu for a quick reflash, and then install our awesome stainless steel muffler and clutch kit. This simple kit will gain 40+...
Our Stainless Steel FULL FORCE muffler is the easiest and best way to bolt on huge horsepower! We have tested this muffler all winter and it works great with the stock fuel mapping or with enhanced ecu flashes. The 2.5" diameter FULL FORCE muffler is good for a 20+ horsepower gain. Our Stainless Steel FULL FORCE...
PREORDER The ONLY aligned Belt drive assembly on the market for the CATALYST Chassis! This system Removes the eccentric Bearing on the belt drive, changes the jackshaft location and adds a tensioner pulley allowing 3 key features: -Truly Aligned sheaves -Easier Belt changes -Maximize Gearing Possibilities 2.63 to 1.67 Ratios Available PREORDER The ONLY aligned Belt drive...
**PREORDER** UPDATED GEN 2 KITS TO BE RELEASED LATE SPRING/EARLY SUMMER 2026 FOR 25-26 MODEL YEAR MACHINES. 2027 M.Y. KITS WILL BE RELEASED LATE FALL/EARLY WINTER '27 SNOW DEPENDANT **PREORDER** UPDATED GEN 2 KITS TO...
**PREORDER** UPDATED GEN 2 KITS TO BE RELEASED LATE SPRING/EARLY SUMMER 2026 FOR 25-26 MODEL YEAR MACHINES. 2027 M.Y. KITS WILL BE RELEASED LATE FALL/EARLY WINTER '27 SNOW DEPENDANT **PREORDER** UPDATED GEN 2 KITS TO...
**PREORDER** UPDATED GEN 2 KITS TO BE RELEASED LATE SPRING/EARLY SUMMER 2026 FOR 25-26 MODEL YEAR MACHINES. 2027 M.Y. KITS WILL BE RELEASED LATE FALL/EARLY WINTER '27 SNOW DEPENDANT **PREORDER** UPDATED GEN 2 KITS TO...
2014-2015 ProClimb Upper A Arm Black / Right Hand from a M8000. Will fit on 2012-2013 models too, just drill mounting holes next size bigger. 2014-2015 ProClimb Upper A Arm Black...
C3 SyncroDrive for the 2012-15 Arctic Cat 800 Proclimb / ProCross. You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Gear and belt changes in minutes Inexpensive 8mm pitch belts... C3 SyncroDrive for the 2012-15 Arctic...
Finally a kit that you will lose 4 lbs of unwanted weight, no more misadjusted cables, broken cables, or cable routing problems when you put after market pipes on your sled and still gives you the same or better performance the factory power valves. Comes with billet valve inserts, all hardware and electronic chip. Finally a kit that you will lose 4...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
For your Wildcat with the Team style clutches 2013.5-2016 models. With all of the adjustment in these weights you can load up the heal, belly, or the tip of the weight to make it shift how you want. These weights are adjustable from 63-84 grams per arm using magnets that weigh just 1.3 grams each. For your Wildcat with the Team style...
Smooth lines and a great fit make up the new Zbroz Racing Polaris Axys bumper. Built with bigger grabbing areas for those deep powder days. Also has a built in skid plate to protect the bottom of the bulk head from those pesky rocks and stumps you might find Smooth lines and a great fit make up...
We offer three different head gaskets for the 1100 turbo Arctic Cat. -stock thickness, oem style replacement -thinner for more compression, usually for stock motors for drag racing or higher altitudes -thicker for lower compression, usually used bigger boost applications We offer three different head gaskets...
MOUNTAIN SERIES PRO SHIFT KITS are designed for long track models in deep snow. They are tuned for very quick throttle response in deep snow when boondocking and climbing, so that you have instant power all of the time. MOUNTAIN SERIES PRO SHIFT KITS are...
PROSHIFT OVERDRIVE CLUTCH KITS WORK AMAZING ON THES CATS! THE CLUTCHES RUN MUCH MUCH COOLER! THIS KIT WILL PULL HARD AND FAST UP A BIG SHOOT, YET WILL JUST RIP WHEN YOU'RE IN THE BACK COUNRTY BOONDOCKING BECAUSE OF THE KILLER RESPONSE! IT IS TYPICAL TO GAIN 4-5 MPH OF TRACK SPEED WITH THIS KIT! THE PRO SHIFT OVERDRIVE CLUTCH KIT IS THE VERY FIRST... PROSHIFT OVERDRIVE CLUTCH KITS WORK...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
Our mountain series billet heads bolt on some serious power for your Arctic Cat 800 motor. It is designed to run on premium pump gas when ran above 4000 ft altitude. Huge torque gains to provide the grunt you need and want for boondocking and climbing. Much quicker throttle response! 7-8 horsepower peak and 8-10 horsepower in the mid range! These heads... Our mountain series billet heads bolt...