Check out the newly revised PRO-TECT AIR 2.0!! Protect your engine from...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
We have two different rate torsion springs for our billet helix and...
This simple kit supplies you with all of the roller bearings in the...
ROCK Performance Rollers are made from engineering grade plastics...
We have 3 different clutch springs for all Polaris drive clutches, and...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb,...
No manufacturer
No supplier
For Polaris clutches is our Pro Mag adjustable weights that are adjustable from 58-79 grams. They have 4 positions per weight arm with easy to use magnets. This allows you to proportion the weight just the way you want it, whether you want a light or heavy tip weight. Each magnet weighs 1.3 grams for easy tuning. For Polaris clutches is our Pro Mag...
This reversible ratcheting wrench is used to remove and install the helix. This reversible ratcheting wrench is...
Replacement oil tank that we use with our lightweight chaincase covers and belt drive kit. Or, use for custom applications as well. Comes with heat tape on the muffler facing side. Replacement oil tank that we use with...
The Jaws BIG BORE SHARK single pipe is a must for big bore motors. Works on all big bores from 900-950cc. Expect to gain 10-15 horsepower on a big bore motor with this pipe over the stock pipe. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG BORE SHARK single pipe...
The Jaws BIG SHARK 800 pipe adds tremendous bottom end power and easy hp over stock on the top end with peak power at 8100-8300 rpm on the Ctec2 motors. With our reflash the power jumps 12-15+ horsepower and 8 lb/ft of torque. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG SHARK 800 pipe adds...
The Jaws BIG SHARK 800 pipe adds tremendous bottom end power and an easy 11-13 hp over stock on the top end with peak power at 83-8500 rpm on 2012-17 800 HO. With the power commander (and our map) plus a 2.5 degree offset timing key, the power jumps to 15-16 horsepower. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG SHARK 800 pipe adds...
The Patriot 850 motor is a fun package, but there was plenty left on the table. The stock porting was relatively mild, and there was plenty of room to bore the stock cylinder out. Bring you sled to life with our 909 cc big bore kit!! The combination of the larger bore, improved porting, and our billet head produces one awesome kit. The Patriot 850 motor is a fun...
ULTIMAX BELTS are an extremely high quality belt!! They come with a 2 year warranty!! This models fits the Arctic Cat Sport and Trail models. ULTIMAX BELTS are an extremely high...
THIS IS JUST THE HELIX IF YOU WANT TO TRY A DIFFERENT ANGLE AND ALREADY HAVE OUR ADJUSTABLE ENDCAP THIS IS JUST THE HELIX IF YOU WANT TO...
Our 900 Big Bore Kit has been cranking out some serious power for several years now. It makes very impressive power and wicked torque. The powerband is broad and it's a blast to drive!! With the use of the Jaws Big Bore pipe, Boyesen reeds, a 2.5 degree timing key, and a power commander, this kit will crank out 190+ hp and over 120 lb/ft of torque on... Our 900 Big Bore Kit has been...
Our Stainless Steel 3" Big Flow muffler is the easiest and best way to bolt on huge horsepower! We have tested this muffler and it works great with the stock fuel mapping or with enhanced ecu flashes. The 3" diameter high flow muffler is good for a 25+ horsepower gain! This muffler has drag race power and a trail friendly sound. Our Stainless Steel 3" Big Flow...
Sealed Jackshaft bearings for chaincase and clutch sides on all 2012-current 23 arctic cat models Sealed Jackshaft bearings for...
!!SOLD AS A SET OF 3!! Direct replacement for the stock 2 piece fiber bushings in the stock weights that are know to wear prematurely and cause unnecessary wear to your clutch and it's components. Also fits SSI Promag Weights. This is a full length, composite bushing designed to roll as efficiently as possible while still being durable enough to last. !!SOLD AS A SET OF 3!! Direct...
PREORDER FOR 25/26 NOW Turn your stock CATALYST 600 in to a 900cc monster with our new CATALYST 900 Kit! This kit comes with everything you need. Engine turnarounds are expected to be less than 1 week upon receiving your engine. These are the same 900's we've been running on the 800 Ctec's, adapted to fit the 600's, which have proven their durability... PREORDER FOR 25/26 NOW Turn your...
Takeoff Stock Secondary ADAPT Spider, both new and extremely low mile used available be sure to select the correct option on the drop down menu **used have less than 100 miles on them** Fits all models with ADAPT secondary clutches Over $40 new complete with rollers Takeoff Stock Secondary ADAPT Spider,...
NOW SHIPPING We've been working with our friends over at Ibexx to help develop these VERY Impressive N.A. Performance Refresh Tunes. With massive improvements in throttle response, HUGE 20+ HP midrange gains and an overall cleaner, crisper running sled, these tunes rock! Select correct options in the dropdown menu NOW SHIPPING We've been working with...
27 M.Y. kits to be released late fall/early winter Our stage 2 Kit increases throttle response and maximizes pull all the way through the power band. With a revised tune that better utilizes timing, fuel, and added oil you'll not only make more power but also increase durability of internal parts! Can be run with stock mufflers 27 M.Y. kits to be released late...
27 M.Y. kits to be released late fall/early winter Our stage 2 Kit increases throttle response and maximizes pull all the way through the power band. With a revised tune that better utilizes timing, fuel, and added oil you'll not only make more power but also increase durability of internal parts! Can be run with stock mufflers 27 M.Y. kits to be released late...
327 miles, immaculate condition! 154x3" Alpha track, "stock" platform with virtually everything we build already installed! Engine is bone stock besides a Low compression billet head - pump gas at all elevations. Equipped with over $4000 in aftermarket chassis parts this sled is decked out and is a riot to ride! almost 50 lbs lighter than stock! see below... 327 miles, immaculate condition!...
PRO-MAG weights are an easily adjustable weight for Yamaha models. We have a variety of weight ranges to work for different horsepower ranges. They are adjustable in 1.3 gram increments so you can really fine tune your machine. There are three positions per clutch arm from the heal to the tip so you can change how the weight is distributed in the arm. PRO-MAG weights are an easily...
PRO-MAG weights are an easily adjustable weight for Yamaha models. We have a variety of weight ranges to work for different horsepower ranges. They are adjustable in 1.3 gram increments so you can really fine tune your machine. There are three positions per clutch arm from the heal to the tip so you can change how the weight is distributed in the arm. PRO-MAG weights are an easily...
This kit for the AXYS 800 is simple and very very effective! The pipe mod and power commander combination adds 10 horsepower over stock! And the cool part is we gained 5 lb/ft of torque!!! We use a powercommander FC fuel controller which comes preprogrammed for you. And we put the power to the ground with our Pro Shift clutch kit. This kit for the AXYS 800 is simple...
This slick shift bearing fits into the helix and replaces the stock plastic spacer that the spring pushes against. By adding this specially made bearing in its place, it helps to free up any friction in the clutch. What you gain in quicker throttle response when your are off and on the throttle. It's a simple part that really works! This slick shift bearing fits into...
We have put together a powerful, fast, and fun kit for the RZR Turbo! Its just so easy and so awesome! Bolt on 25-35 horsepower! Three parts: our BLACK OPS MUFFLER, PRO-SHIFT CLUTCH KIT, and a POWERVISION downloader. Bang for your buck his kit just can't be beat!! Runs circles around a stock machine! We have put together a powerful,...
Our ProMax kit is what you want to optimize horsepower and performance for your General 1000! Available for all elevations and cabs. We reflash the stock ecu to unleash that power! The Black Ops muffler has a great sound and adds awesome power and throttle response. Finally the ProShift clutch kit puts the power to the ground!! Our ProMax kit is what you want to...