No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
2022+ MTN MAX w/ ADAPT CLUTCHING There are 82 products.
-
800 CTEC-2 TITANIUM POLISHED MUFFLER,... 800 CTEC-2 TITANIUM POLISHED MUFFLER,...
Our Titanium mufflers now come polished for a great look! The dual overlapping baffles have a nice deep tone without being too loud. This super lightweight muffler design weights just 3.2 lbs!! That's over 19 lbs lighter than stock!! Our Titanium mufflers now come...
USD $549.95
In Stock -
ARCTIC CAT STAINLESS POLISHED MUFFLER,... ARCTIC CAT STAINLESS POLISHED MUFFLER,...
Our Stainless Steel mufflers are polished for a great look! The dual overlapping baffles have a nice deep tone without being too loud. This super lightweight muffler design weights just 6 lbs!! That's 14-16 lbs lighter than stock!! Our Stainless Steel mufflers are...
USD $299.95
In Stock -
PRO-MAX SHORTY WINDSHIELD / DASH POD PRO-MAX SHORTY WINDSHIELD / DASH POD
If you have our intake and need a replacement, or if you want to customize your sled by removing the headlight. Some people have adapted them to the 4 stroke models too. They are available for both gauge styles, 2012-2017 Sno Pro gauge, or the newer style Arctic Cat gauge used on M6000 models, and M8000 models 2018 and newer. This gauge is used in... If you have our intake and need a...
USD $109.95
In Stock -
MOUNTAIN SERIES PIPE AND Y PIPE FOR ARCTIC... MOUNTAIN SERIES PIPE AND Y PIPE FOR ARCTIC...
Our pipe and y pipe combo for the 8000 Ctec cranks out some serious power! 10-11 more horsepower peak and mid range, plus a nice 6 ft/lbs of torque gain in the mid range. This combo has a lot of grunt and killer throttle response! Our y pipe made huge gains all by itself even, and the Pipe just really make the combo work excellent! Our pipe and y pipe combo for the...
USD $529.95
-
ANTI-SLOP 2.0 STEERING STEERING SUPPORT... ANTI-SLOP 2.0 STEERING STEERING SUPPORT...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs 2012-2021. We were the originator for the Arctic Cat M Series sleds, and the newer machines sure need it too. The Anti-Slop 2.0 bushing is made of a high strength, high yield, high compression material that will take up the slop of your factory... BDX has a developed a new replacement...
USD $49.95
In Stock -
ANTI-SLOP 2.0 SECONDARY STEERING STEERING... ANTI-SLOP 2.0 SECONDARY STEERING STEERING...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs and Ascenders 2012-2020 Mountain sleds. Also fits the high country models with the dual post steering. We were the originator for the Anti-Slop kit for the Arctic Cat M Series sleds, and the newer machines sure need it too. BDX has a developed a new replacement...
USD $39.95
In Stock -
RECOIL VENT FROGSKIN FOR CTEC 8000 RECOIL VENT FROGSKIN FOR CTEC 8000
This simple vent cover will keep unwanted debris and snow out of your recoil for your Arctic Cat Ctec 8000 2018+ Simply peel and stick into place. This simple vent cover will keep...
USD $24.95
In Stock -
900 BIG BORE KIT TO THE MAX - CTEC 900 BIG BORE KIT TO THE MAX - CTEC
The TO THE MAX KIT comes with everything you need to bring the motor to maximum horsepower. PROMAX 900 Cylinders, Custom Wiseco pistons, Billet Head, Replaceable Dome inserts, Complete Top End Gasket set, Jaws Big Bore Pipe and Y pipe, our SSI Stainless Muffler, Boyesen Reed Valves, 55mm Pro Lite Throttle Bodies, Pro-Shift Clutching, and The IBEXX GOAT... The TO THE MAX KIT comes with...
USD $4,595.00
In Stock -
8000 CTEC BUDGET PERFORMANCE KIT 8000 CTEC BUDGET PERFORMANCE KIT
This kit give you the best bang for your buck for both performance and weight! - 15 lbs of weight with our polished stainless steel muffler - The performance stainless Y pipe and Boyesen reeds 7-8 more horsepower and 5 more lb/ft of torque! - Put the power to the ground with our Pro-Shift clutch kit FITS ALL YEAR CTEC 2 MODELS. This kit give you the best bang for...
USD $1,129.95
In Stock -
900 PRO-MAX 2 BUDGET BIG BORE KIT 900 PRO-MAX 2 BUDGET BIG BORE KIT
Well we all know that Arctic Cat really stepped up their game on the new 8000 DSI motor. It runs incredibly smooth, efficient, and responsive with much more low end and mid range torque. Now just take that new and improved motor and make it a 900! Wow what a fun machine it becomes! The 900 PROMAX2 Big Bore kit is the real deal. Build your own with... Well we all know that Arctic Cat...
USD $2,199.00
In Stock -
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
USD $24.95
In Stock -
Universal Spring Compressor Universal Spring Compressor
Universal Spring Compressor *Removes all primary and secondary clutch springs *Works on all Arctic Cat, Polaris, Ski-doo, Yamaha, Primary and most secondary’s, Including TEAM. *Removes Arctic Cat Diamond Drive Springs *Can bolt directly to bench or fit in any standard vise Universal Spring Compressor *Removes...
USD $89.95
In Stock -
MAGNETS FOR PRO-MAG WEIGHTS 48 PACK MAGNETS FOR PRO-MAG WEIGHTS 48 PACK
48 PACK OF MAGNETS FOR PRO MAG WEIGHTS 48 PACK OF MAGNETS FOR PRO MAG WEIGHTS
USD $34.95
In Stock -
MAGNETS FOR PRO-MAG WEIGHTS 24 PACK MAGNETS FOR PRO-MAG WEIGHTS 24 PACK
24 PACK OF MAGNETS FOR PRO MAG WEIGHTS 24 PACK OF MAGNETS FOR PRO MAG WEIGHTS
USD $22.95
In Stock -
JAWS TWIN CUSTOM RACE PIPES ARCTIC CAT... JAWS TWIN CUSTOM RACE PIPES ARCTIC CAT...
For race use only, we have teamed up with Jaws to offer these twin pipes. They are designed to run at 8600-8900 rpm depending on the porting. Each set is custom built per the application. We have Jaws adjust their pipes to our suggested tweaks for our motors. And they can be built to suit your custom porting too. For race use only, we have teamed up...
USD $1,359.95
In Stock -
JAWS CTEC BIG SHARK SINGLE PIPE ARCTIC CAT... JAWS CTEC BIG SHARK SINGLE PIPE ARCTIC CAT...
The Jaws BIG SHARK 800 pipe adds tremendous bottom end power and easy hp over stock on the top end with peak power at 8100-8300 rpm on the Ctec2 motors. With our reflash the power jumps 12-15+ horsepower and 8 lb/ft of torque. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG SHARK 800 pipe adds...
USD $599.95
In Stock -
LIGHTWEIGHT OIL TANK FOR CTEC2 ARCTIC CAT LIGHTWEIGHT OIL TANK FOR CTEC2 ARCTIC CAT
Replacement oil tank that we use with our lightweight chaincase covers and belt drive kit. Or, use for custom applications as well. Comes with heat tape on the muffler facing side. Replacement oil tank that we use with...
USD $69.95
In Stock -
ARCTIC CAT 8000 CTEC-2 CRANKSHAFT REMAN ARCTIC CAT 8000 CTEC-2 CRANKSHAFT REMAN
Arctic Cat 8000 ctec-2 crankshafts. Fully gone through and Rebuilt. In perfect shape. Fits all 2018+ Models Over $1200 New, save over $200 with this reman + your core exchange! Arctic Cat 8000 ctec-2 crankshafts....
USD $999.95
In Stock -
CTEC2 800 STAGE 1 KIT WITH JAWS PIPE CTEC2 800 STAGE 1 KIT WITH JAWS PIPE
Easy power for your CTEC2 800, this simple kits makes power! We get the power to the ground with our Pro-Shift Clutch kit. Producing a 14-15 hp gain with the JAWS BIG SHARK Pipe, Y pipe, OPTIONAL SSI Muffler, now we have crisper throttle response and better mid range with our ECU FLASH Easy power for your CTEC2 800, this...
USD $1,349.95
In Stock -
CTEC2 800 STAGE 2 ULTIMATE PERFORMANCE KIT CTEC2 800 STAGE 2 ULTIMATE PERFORMANCE KIT
This kit puts the best bolt on parts for your 800 ctec all together for the ULTIMATE Bolt On Performance Kit! Producing a 20 hp gain with the JAWS BIG SHARK Pipe, Y pipe, OPTIONAL SSI Muffler, SSI Billet Head, Boyesen Rage Cages, Tuned with our ECU FLASH This kit puts the best bolt on parts...
USD $2,149.95
In Stock -
TOTAL CHAINCASE PROTECTION ARCTIC CAT /... TOTAL CHAINCASE PROTECTION ARCTIC CAT /...
Our Total Chaincase Protection kit will prevent your chaincase to getting wrecked from impacting something such as rock or log. With the factory drop and roll chaincases protruding below the bellypan, they are very susceptible to impact, which will destroy the case and leave you stranded!! Our Total Chaincase Protection kit...
USD $79.95
In Stock -
INNER CHAINCASE PROTECTION (with BDX... INNER CHAINCASE PROTECTION (with BDX...
Our Inner Chaincase Protection kit will prevent your chaincase to getting wrecked from impacting something such as rock or log. With the factory drop and roll chaincases protruding below the bellypan, they are very susceptible to impact, which will destroy the case and leave you stranded!! Our Inner Chaincase Protection kit...
USD $49.95
In Stock -
BILLET BRAKE LEVER ARCTIC CAT/YAMAHA... BILLET BRAKE LEVER ARCTIC CAT/YAMAHA...
Check out our Billet Brake Levers for the New Arctic Cat and Yamaha snowmobiles! CNC machined and then powder coated to match, or get a natural aluminum one. A direct replacement for the stock plastic lever, which breaks quite easily!! Our design is perfect for 1, 2 and 3 finger riders! Fits ALL 2019-2025 Cats, 2021+ Yamaha Check out our Billet Brake Levers for...
USD $59.95
-
V FORCE REEDS ARCTIC CAT CTEC V FORCE REEDS ARCTIC CAT CTEC
V FORCE REEDS FOR THE ARCTIC CAT MADE 3 HP PEAK AND 4 IN THE MID RANGE ON A STOCK MACHINE! BOLT ON POWER! They really work well in this motor! Stock replacement Catalyst Reeds The new rubber coated cages make the durability of the petals simply the best on the market!! #V3112BR-873-2 Fits 2018-current Arctic Cat Ctec2 Models V FORCE REEDS FOR THE ARCTIC CAT MADE...
USD $258.00
-
SUPER LITE BRAKE ROTOR 2018+ ARCTIC CAT... SUPER LITE BRAKE ROTOR 2018+ ARCTIC CAT...
Check our lightweight brake rotor for the 2024+ Catalyst and 2018+ Arctic Cat mountain sleds, Yamaha Mountain Max 800, Arctic Cat Riot X 2021. It's 3/4 of a pound lighter on 2021 models with the solid brake rotor, and 1/2 a pound lighter than the stock 18-20 drilled models. Less rotating weight and overall weight. This rotor also improves braking.... Check our lightweight brake rotor for...
USD $139.95
In Stock
